What Is Feather Board Saw?

Author

Author: Loyd
Published: 8 Nov 2021

Featherboards for Cutting a Bead

A featherboard is a simple jig that makes it much safer to cut thin stock on a table saw or a router table. Every woodworker should have a few featherboards on hand. When cutting a bead or other intricate detail on a table, featherboards are very important.

The bead can be ruined by a slip of the stock away from the table. A pair of featherboards will guarantee a clean bead detail. You can cut the stock to the length that you need.

The Cutting Procedure for Power Tools

Power tools have a lot of accessories. Operators have to decide which accessory is best to use. The feather board is a must have if you want to improve your cutting results.

There is a rule you must follow when cutting your board length. You must cut your stock according to your needs. Consider the distance from your point to your saw blade.

The BOW featherboard

There are several technical challenges involved with the purchase of a featherboard. The matter is dependent on your needs, priorities, experience, and skill. The featherboard is made with 18 feathers.

The high number of board feathers make sure that your cutting piece is safe to set. The downward faced feathers give an aerodynamic advantage. The featherboards that you get from Kreg are just as good as they look.

The boards are made using plastic that is impact resistant and long lasting. The makers have included a feature called a wedge-lock. The product can adapt to other sawing hardware without compromising on safety.

The product is secured by plate guards with two wing nuts. You can adjust them using the curved tracks. The tracks contract if you squeeze the nuts, increasing pressure on the cutting material to keep it safe.

You can achieve your intended pressure by freeing the nuts. The board is made from shock absorbent plastic that has been injection molded. The aerodynamic structure provides red downward feathers for optimum forward pressure and blocking sliding.

A DRILL PRO Double Featherboards Feather Loc Board

The plastic featherboard is easy to install and will be great for the buyer on a budget. The design makes it easy to install and the product will make it easier to make high-quality cuts. The Bench Dog is an easy to install piece of equipment.

The soft featherboard is designed to maintain a consistent shape even when used heavy. feather boards are a fairly affordable piece of equipment. You can get a decent unit for less than $50.

If you are in a tight spot, you may be able to find something in the twenty dollar range. The less use you are likely to get out of the product, the cheaper you go. Maybe you were hoping to keep costs down.

If you have that situation, you can get a pretty good deal on a DRILL PRO Double Featherboards Feather Loc Board. Anthony Donovan is a licensed general contractor who does bathroom and kitchen remodels. His favorite projects involve a lot of retiling.

The featherboard

The featherboard is a clever woodworking jig that keeps your stock held against the rip fence and your fingers out of harm's way. It is useful when ripping stock. The overall length is 18 but will be trimmed to 12 after the holes are drilled and the slot is cut.

It's easier to handle when you cut the slot down the middle. When the knobs are tightened, the machine screws are pulled into the counter-clockwise holes and the runner is spread out. It won't move if it's properly tightened.

Click Bear

X Cancel
No comment yet.